EN
When a product depends on parts that must fit, seal, and perform exactly as designed, the machining partner you choose makes the difference between a smooth launch and a costly rework cycle. ANOK Precision Manufacturing (ShenZhen) Co., Limited is a one-stop precision factory that has turned this challenge into a repeatable process for customers across medical, aerospace, automotive, and automation industries. From a single prototype to high-volume production, the company delivers dependable cnc machining solutions that hold tight tolerances without compromising turnaround.
Many buyers source machining, surface finishing, and assembly separately, then spend weeks coordinating vendors when a fit problem appears. A true one-stop facility removes that friction. ANOK began in 2007 as a mold workshop, expanded its overseas-facing factory in 2009, and built out a dedicated precision machining department in 2011. That fifteen-year progression means the shop did not simply buy machines - it built the workflows, quality systems, and inspection routines that make precision cnc machining reliable at scale.
ISO 9001:2015 certified since 2018, ANOK routinely holds tolerances down to ±0.002 mm and surface finishes to Ra 0.2-0.4, and it references ISO 13485 and AS9100 working practices for regulated customers.
Being a medium-sized factory matters too. Unlike micro-shops that cannot absorb rush orders or giant conglomerates that treat prototype work as an afterthought, ANOK balances capacity with attention - roughly 50 machining stations across its centers, with room to scale small batches up to production runs.
Rather than forcing every part through a single process, ANOK matches the right machine to the geometry. That selection is where cost and quality are won.
From 3-axis work to 4-axis and 5-axis machining, the shop cuts complex geometries in metals and plastics alike. The 5-axis centers move a part through multiple angles in a single setup, which cuts cycle time and improves accuracy on features that would otherwise require repositioning.
Nearly 15 cnc turning machines run up to 20 hours a day, producing shafts, bushings, and threaded components from bar or block stock. The line handles parts up to 520 mm in diameter and 3600 mm in length, with tolerance held to ±0.002 mm and threads cut to specification.
When a design calls for parallelism, flatness, or a fine finish, surface grinding covers planes, right angles, grooves, and complex contours. Parallelism holds at ±0.002 mm, and grinding reaches Ra 0.4 with mirror-finish Ra 0.2 achievable through polishing.
For hardened steel, titanium, carbides, and graphite, wire edm cuts without thermal damage, holding tolerance to 0.003 mm and perpendicularity to 0.001-0.002 mm. Smallest hole diameter reaches 0.07 mm, and the line handles parts up to 500 mm in diameter and 400 mm thick.
Finishing is handled in-house through anodizing, electroplating, powder coating, passivation, blackening, and specialized chemical treatments. ANOK's high-precision assembly line then builds fixtures - machining, assembly, and checking fixtures - and completes module assembly to micrometer accuracy, closing the loop from raw stock to ready-to-use component.
ANOK machines the materials that typical shops decline. On the metal side, that includes titanium alloy (Ti-6Al-4V), Inconel nickel-based alloys, aluminum (6061/T6, 7075/T6), stainless steel, brass, copper, magnesium, and tool steel. On the plastic side, the shop handles PEEK, nylons, POM, PTFE, polycarbonate, ABS, and PMMA - materials that fail quickly in the wrong hands.
That material breadth supports eight industries, from medical components and food equipment to motorcycle parts, aerospace elements, and automation components. In aerospace, for example, parts are produced against MIL-STD-810G conditions and FAA/EASA airworthiness requirements using 5-axis centers - a capability that few general machine shops can claim.
A common reason parts go over budget is a design that is expensive to machine. ANOK's engineers apply DFM analysis early, recommending practical material and tolerance choices that streamline production. The company reports scrap rates as low as 0.3% and DFM-driven design cost reductions of up to 30% on qualifying projects - savings that compound across larger runs.
Whether you are validating a single concept or ramping a production batch, ANOK delivers cnc machining services china buyers can depend on, with engineering support and inspection data at every step. The factory ships globally, and its growth from a 2007 mold workshop into a certified precision manufacturer means the processes behind your parts are proven, not improvised.
Get Your Part Started
Send your drawings to ANOK and let its engineers review the design, recommend the right material and tolerance, and return a clear quote. Visit anokcnc.com or contact the team at info@anok-machining.com to move your project from CAD to finished part.