EN
Not every machine shop delivers true precision cnc machining. The distinction becomes obvious the moment you ask three questions: what tolerances can you hold consistently, what does your quality system look like, and can you handle the process from raw material to finished product? A dependable cnc machining manufacturer answers all three with documentation, not promises.
ANOK Precision Manufacturing, a custom precision machining factory in Shenzhen, China, is built around exactly this idea. Opening in 2007 as a mold workshop, the company added an overseas factory in 2009, formed a dedicated precision machining department in 2011, and earned ISO 9001:2015 certification in 2018 before moving into a new facility in 2021. That nearly two-decade track record gives engineering teams a partner that has matured alongside demanding production environments.
Precision is measured in numbers, and ANOK backs its claims with concrete capability. The shop holds custom cnc parts to tolerances down to ±0.002 mm, with surface roughness reaching Ra 0.2 to 0.4 µm. Its machining centers include three-, four-, and five-axis machines, with five sets of 5-axis units and twelve sets of 4-axis centers handling complex geometries that would otherwise require multiple setups.
Key capability at a glance: tolerances to ±0.002 mm, surface finish to Ra 0.2 µm, 50+ machining facilities, and CNC turning capacity up to 520 mm diameter and 3600 mm length operating around 20 hours a day.
Material flexibility matters just as much as machine count. ANOK machines both metals and engineering plastics, including difficult-to-cut titanium alloy (Ti-6Al-4V), Inconel nickel-based alloy, and PEEK. On the metal side, the shop handles aluminum, brass, copper, stainless steel, alloy and tool steel, and tungsten; on the plastic side, it covers ABS, nylon, POM, PC, PTFE, Delrin, and ULTEM. Having one partner that can switch between a hard alloy and a high-temperature polymer without changing the entire supply chain is a real advantage.
A turnkey approach means the critical finishing and assembly steps are not outsourced. ANOK operates six core services that cover the full production cycle:
This one-stop model shortens the chain of communication that often causes delays and quality drift. Instead of shipping a part to a coatings supplier and then a separate assembly shop, a single accountable partner manages the entire flow.
Precision requirements vary by industry, and ANOK has applied its capabilities across eight sectors, from medical and aerospace to food equipment, motorcycle, agriculture, mechanical, communication, and automation. In medical work, it produces dental articulator components with assembly tolerance up to 0.015 mm and endoscope tubes with an inner diameter of just 0.2 mm. For aerospace, it meets MIL-STD-810G standards and references FAA/EASA airworthiness requirements using five-axis linkage machining centers.
For automation and robotics, the shop offers DFM analysis and a design-to-assembly service, meaning engineers can hand over a concept and receive a finished, tested module rather than a box of loose parts.
One of the most practical ways a machining partner saves money is through DFM optimization. ANOK applies cnc machining solutions early in the design phase to flag features that drive up cost, such as overly deep pockets, unnecessary tight tolerances, and hard-to-reach tooling geometry. The company reports that its optimization work can reduce design costs by up to 30%, while its scrap rate stays as low as 0.3% on metal machining programs.
Whether you need a single prototype or a high-volume production run, ANOK Precision Manufacturing is ready to review your drawings, apply DFM feedback, and deliver consistent, tightly toleranced parts. Reach out with your part files for a quotation and see how a full-process precision machining partner can shorten your supply chain and protect your quality.