EN
Think of the components that keep modern machines running: a motor shaft spinning inside a bearing, a threaded valve stem, a pump housing, a gear blank. Nearly all of them start as a bar or block of metal that rotates against a cutting tool until it becomes a perfectly round, precisely threaded part. That is the work of CNC turning, and when the tolerance budget is tight, the choice of partner matters as much as the material itself.
Milling removes material to create flat and contoured surfaces; turning is what produces the round, symmetric geometries that make shafts, pins, housings, and fittings work. A turned part must hold concentricity between its outer diameter and its bore, cut threads accurately, and repeat that result across thousands of pieces. On a cnc turning center, the workpiece rotates while the tool moves along controlled axes, letting operators reach tolerances that more general machining cannot promise.
ANOK Precision Manufacturing (ShenZhen) Co., Limited has been refining this process since 2007. What began as a mold workshop is now a full precision machining factory whose precision cnc turning floor turns bars and blocks into cnc turning parts for aerospace, medical, energy, and automation programs around the world.
Scale is where many turning vendors fall short. ANOK runs nearly 15 CNC turning machines for up to 20 hours a day, giving the factory the capacity to move from a single prototype to high-volume production without switching suppliers. The turning department handles bar and block material to produce complex external and internal geometries, including all kinds of threads.
The numbers behind the operation underline the precision. As a cnc turning machining supplier, ANOK holds tolerances down to ±0.002 mm, and the machines accommodate parts up to 520 mm in diameter and 3600 mm in length. That maximum length is what lets the factory take on long shafts and large components that many shops cannot fit on a turning center.
Turning floor at a glance: nearly 15 CNC turning machines running up to 20 hours a day, tolerances down to ±0.002 mm, max part diameter 520 mm, and max length 3600 mm.
For parts that need both round and contoured features, ANOK combines turning with milling in a single machine. This CNC Turning Milling Compound work synchronizes rotational and linear axes, so a component can be turned, drilled, milled, and finished without being re-clamped between operations. Fewer setups mean less handling, tighter alignment, and faster delivery — a real advantage for complex precision components.
Beyond turning, the same factory floor supports cnc machining services such as 4-axis and 5-axis milling, precision surface grinding, and wire EDM, so an entire part can be produced and finished under one roof.
A turning partner is only as good as the materials it can machine. ANOK's turning operation handles a broad metal portfolio — aluminum (6061, 7075), brass, copper, titanium, stainless steel, alloy steel, and tool steel — alongside high-performance plastics such as Delrin, nylon, PEEK, and PTFE. For demanding applications, the factory also machines difficult alloys like titanium and nickel-based materials, which aggressive cutting can easily ruin in the wrong hands.
When a thread or a surface finish must survive in a corrosive or high-temperature environment, ANOK can follow turning with coating and surface treatment — anodizing, electroplating, powder coating, and passivation — so the part leaves the factory ready for service.
ANOK's turning capability is not theoretical. The factory serves eight industries where precision is non-negotiable:
The same disciplined cnc turning parts manufacturer process that serves medical and aerospace customers also serves automation, agriculture, food, and mechanical programs.
ISO 9001:2015 certified, ANOK documents every step from raw material incoming through final inspection to shipment, and also aligns with ISO 13485 and AS9100 standards. The same discipline that has earned repeat business from customers across Europe and North America since 2007 ensures the quality you approve on the first article is the quality you receive on the thousandth.
Partner with a turning floor that delivers. When you need cylindrical parts that hold tight tolerances in demanding materials, you need a partner with both the equipment and the discipline to deliver. ANOK combines nearly 15 turning machines, turning-milling compound capability, tolerances to ±0.002 mm, and a track record stretching back to 2007 — all under one ISO 9001:2015 certified roof.
Ready to see what ANOK can turn for you? Send your drawings for a quote, or talk to the team about DFM optimization to reduce design and production costs. Visit anokcnc.com to get started.