EN
Titanium is one of the most valuable yet demanding materials in modern manufacturing. It offers an exceptional strength-to-weight ratio, excellent corrosion resistance and biocompatibility, which is why it plays a central role in aerospace, medical and racing applications. But the same properties that make titanium desirable also make it notoriously difficult to machine. When you need titanium cnc machining, the partner you choose can mean the difference between a flawless, cost-effective run and a batch full of scrapped, cracked or overheated parts.
Titanium alloys such as Ti-6Al-4V retain high strength at elevated cutting temperatures, which generates intense heat at the tool tip and accelerates tool wear. The material also has low thermal conductivity, meaning heat stays concentrated in the cutting zone instead of dissipating through the workpiece. Combined with a tendency to work-harden and a low modulus of elasticity that can cause deflection, titanium machining demands rigid machines, sharp tooling, conservative speeds and disciplined coolant control. A general-purpose shop without dedicated expertise will struggle to hold tight tolerances and consistent surface finish.
ANOK Precision Manufacturing (ShenZhen) Co., Limited is an ISO 9001:2015 certified custom precision cnc machining factory with more than a decade of experience cutting difficult-to-machine materials. Founded in 2007 and headquartered in Shenzhen, China, ANOK operates a full-spectrum machine shop with 50+ machining facilities, nearly 15 CNC turning machines running up to 20 hours a day, and dedicated 4-axis and 5-axis machining centers. This depth of equipment allows the company to take a titanium component from raw bar or block to finished, coated and assembled product under one roof.
The core capabilities supporting titanium work include high-precision CNC milling on 3-, 4- and 5-axis machines, CNC turning that handles maximum part diameters of 520 mm and lengths up to 3600 mm, precision surface grinding, and WEDM (wire electrical discharge machining) for cutting hardened tool steel, titanium, carbides and graphite without thermal damage. Each process is supported by in-house surface treatment and high-precision assembly, so you are not juggling multiple vendors across a fragmented supply chain.
Titanium machining is only valuable when the finished part fits, seals and functions as designed. ANOK holds tolerances down to ±0.002 mm across its milling, turning and surface-grinding operations, and WEDM achieves tolerances as tight as 0.003 mm with perpendicularity of 0.001–0.002 mm. Surface roughness can be brought down to Ra 0.2–0.4 µm, with mirror polishing available for sealing faces and optical surfaces. For complex geometries, the company still maintains tolerances up to ±0.005 mm, supported by rigorous in-house quality control and inspection.
Because titanium parts are often mission-critical, ANOK pairs these tight tolerances with a low scrap-rate philosophy and step-by-step quality control from raw-material incoming to final shipment, so your design intent is preserved through every stage.
A machined titanium part rarely ships raw. ANOK provides a comprehensive range of coating and surface treatment options, including anodizing, electroplating, powder coating, passivation, blackening and specialized chemical treatments, all with dimensional variance under 5 µm on aluminum surfaces. For titanium components, the right passivation or anodizing step improves corrosion resistance and appearance while preserving the dimensional precision achieved in machining. This integrated service means your cnc machining services cover the entire value chain rather than just the cut.
Titanium's properties make it a natural fit for demanding sectors. In medical machining, ANOK produces components from titanium and 316/304 stainless steel, including endoscope tubes with inner diameters of 0.2 mm and dental articulator components with assembly tolerances up to 0.015 mm. In aerospace cnc machining, the company manufactures couplers, engine mounts, landing-gear components, aircraft seat frames and precision UAV parts to MIL-STD-810G standards and FAA/EASA airworthiness requirements. Titanium also appears throughout motorcycle parts, precision agriculture components and automation equipment, where strength and lightweight matter.
Shenzhen sits at the heart of one of the world's most complete manufacturing supply chains, which means raw material, specialized tooling and finishing subcontractors are all within easy reach. ANOK is a cnc parts manufacturer that has grown from a mold workshop in 2007 into a certified precision machining operation with an in-house overseas factory, and it continues to serve customers across Europe and North America. With ISO 9001:2015 certification, references to ISO 13485 and AS9100 standards, and a proven track record of handling difficult-to-machine materials like titanium alloy, Inconel and PEEK, ANOK offers the reliability global buyers expect from a long-term manufacturing partner.
Titanium machining is not a commodity service. It requires the right equipment, the right tooling strategy and the discipline to control heat and deflection from the first cut to the final inspection. By choosing a specialist with true turnkey capabilities, tight tolerances down to ±0.002 mm and certified quality systems, you protect your part quality, your delivery schedule and your bottom line.
Ready to Start Your Titanium CNC Machining Project?
Send your drawings to ANOK Precision Manufacturing for a detailed quote and DFM feedback. Contact the team at info@anok-machining.com or call 86-0755-83723092 to discuss your requirements today.