EN
When a single micron decides whether a part fits, seals, or performs, precision is not a luxury — it is the whole point. For engineers and procurement teams sourcing machined components, the difference between a reliable high precision cnc machining partner and an average machine shop shows up in scrap rates, rework, and field failures that are far more expensive than the parts themselves.
Precision is measured in tolerances and surface finish, not in marketing language. A shop that advertises "quality" without quoting numbers leaves you guessing. A serious cnc machining manufacturer should be able to state, in writing, the tightest tolerance it can hold and the roughness it can achieve. For most demanding applications, that means tolerances down to ±0.002 mm and surface finishes in the Ra 0.2–0.4 µm range.
Beyond nominal numbers, you should look at how those figures are achieved. Genuine precision requires a controlled mix of machine capability, skilled programming, proper tooling, and disciplined inspection. A partner that invests in 4-axis and 5-axis machining centers, calibrated measuring equipment, and a documented quality system is far more likely to hold tight tolerances consistently across production runs.
Sourcing custom cnc parts is a decision that affects your lead time, cost, and end-product reliability. Use these criteria to shortlist candidates:
A factory that can machine titanium alloy (Ti-6Al-4V), Inconel nickel-based alloy, and PEEK alongside standard aluminum and stainless steel demonstrates the process maturity required for complex geometry and demanding industries.
ANOK Precision Manufacturing (ShenZhen) Co., Limited brings a full-spectrum machine shop to the table. Founded as a mold workshop in 2007 and restructured over the years into a dedicated precision machining factory, it now runs 50+ machining facilities in machining centers, nearly 15 CNC turning machines operating around the clock, plus precision surface grinding and wire EDM units. That breadth lets ANOK move a part from prototype through production without bouncing between suppliers.
| Capability | Detail |
|---|---|
| CNC Machining (3/4/5-axis) | Complex geometries, tolerance down to ±0.002 mm |
| CNC Turning | Tolerance ±0.002 mm; max diameter 520 mm, max length 3600 mm |
| Surface Grinding | Parallelism ±0.002 mm; roughness down to Ra 0.4 (mirror Ra 0.2) |
| Wire EDM (WEDM) | Tolerance as tight as 0.003 mm; smallest hole 0.07 mm |
| Coating & Surface Treatment | Anodizing, electroplating, powder coating, passivation, and more |
| High Precision Assembly | Machining, assembly and checking fixtures; module assembly |
A one-stop cnc machining services provider that also handles surface treatment and assembly reduces coordination risk and keeps your DFM, machining, finishing, and inspection under a single responsible roof.
Precision is meaningless if the material is wrong for the job. ANOK machines a broad metal portfolio — aluminum (6061, 7075, 6082), brass, copper, titanium, magnesium, stainless steel (S303, S304, S316L, 440), alloy steel, carbon and mild steel, tool steel, and tungsten — alongside engineering plastics including PEEK, Nylon, POM, PTFE, Delrin, PC, ABS, and PMMA. This range lets you consolidate suppliers and source prototypes and production in one place.
Tight tolerance machining is not a niche; it is the common thread across eight industries ANOK serves. Medical and dental components, food and packaging machine parts, motorcycle and automotive components, agricultural machinery parts, energy and marine mechanical components, 5G and satellite communication parts, aerospace and drone (UAV) parts, and automation and robotics components all rely on the same disciplined process. For aerospace, ANOK builds to MIL-STD-810G and addresses FAA/EASA airworthiness requirements, using five-axis linkage machining centers for complex structural parts.
ANOK is certified to ISO 9001:2015 and references ISO 13485 and AS9100 standards, reflecting a quality system built for industries where failure is not an option. With cleanliness and control extending from raw material incoming to shipment, and with tight-tolerance work held to ±0.002 mm, the factory treats precision as a repeatable discipline rather than a one-off achievement.
Ready to put your most demanding drawings into reliable hands? ANOK Precision Manufacturing in ShenZhen, China, has been delivering precision machined parts since 2007. Share your part files, and the team will review manufacturability, recommend the right materials and finishes, and provide a clear quote. Contact ANOK to discuss your project.